Kammprofile Gasket Drawing Generator

ENGINEERING TOOLS

Kammprofile gasket drawings to ASME B16.20 and EN 12560-6

Build a scaled drawing of a Kammprofile (grooved metal) gasket for ASME B16.5 and B16.47 flanges in seconds. Choose a serrated core, a serrated core with a loose outer guide ring, or a serrated core with an integral outer guide ring, and add an inner ring if you need one. Pick the core metal, facing and ring materials. Dimensions, tolerances, color code and marking load from ASME B16.20 or EN 12560-6, and every drawing includes a detailed cross-section of the serrated core and facings. Switch to Specialty to set your own diameters, thicknesses, tolerances, marking and special requirements. Download the drawing as a PDF, print it at true scale, email it, or send it straight to our team for a quote. Need a spiral wound gasket instead? Use the Spiral Wound Gasket Drawing Generator.

Gasket Standard and flange Pressure class Nominal pipe size Configuration

Add an inner ring

Inner ring attachment

Specialty design Inner ring ID (in) Core ID (in) Core OD (in) Guide ring OD (in)

Full face guide ring with bolt holes

Number of bolt holes Bolt hole diameter (in) Bolt circle diameter (in)

Holes are equally spaced and straddle the centerlines. Set the guide ring OD to the flange OD; left blank, it defaults to the bolt circle plus two hole diameters.

Core thickness (in) Facing thickness (in) Ring thickness (in) Diameter tolerance ± (in) Core thickness tol. ± (in) Ring thickness tol. ± (in) Size designation Custom marking Specialty requirements (one per line)

Blank fields use the standard values shown. Specialty requirements print as notes on the drawing.

Materials Core metal Custom core metal Facing Custom facing Loose guide ring Custom guide ring metal Loose inner ring Custom inner ring metal

Integral rings are the same metal as the core.

Manufacturer ID

Origin and certification Country of origin requirement

Certificate of Conformance (CoC) required Mill Test Reports (MTRs) required

Title block Customer Customer part no. Quantity Revision Drawn by Drawing no. Additional notes (one per line)

Sheet Sheet size

Show millimeters [mm]

Drawings are generated from published ASME B16.20 and EN 12560-6 reference data for convenience. Verify every dimension against the current edition of the referenced standard and your application before manufacture or purchase. Specialty dimensions and attributes are as entered by the user.

(281) 581-0176

sales@patriotbolt.com

1974 S Houston Ave, Humble, TX 77396

Kammprofile gasket drawings to ASME B16.20 and EN 12560-6