Heat Exchanger Gasket Drawing Generator

ENGINEERING TOOLS

Heat exchanger gasket drawings with pass partition bars

Build a scaled drawing of a heat exchanger gasket in any of the 62 standard pass partition configurations, from a plain ring through the multi-pass K shapes. Choose the outline (round, round with flats, D-shape, obround or rectangular) and enter its dimensions, then pick a spiral wound, Kammprofile or double jacketed sealing element with the matching pass bar construction. Spiral wound is offered for round and obround outlines; double jacketed is offered for non-circular outlines. Pass bar locations default to typical proportions and can be set to your exchanger’s exact dimensions, rotated or mirrored. Every drawing includes ordinate dimensions for the bars, a peripheral cross-section, a pass bar cross-section, materials, marking and notes. Download the drawing as a PDF, print it at true scale, email it, or send it straight to our team for a quote. Need a flange gasket instead? Use the Spiral Wound or Kammprofile gasket drawing generator.

Sealing element Gasket type

Inner ring (carries the pass bars)

Outer guide ring

Pass partition configuration

Rotate pattern

Mirror pattern

Shape and size Outline Guide ring OD (in) Sealing element OD (in) Sealing element ID (in) Inner ring ID (in) Sealing element OD (in) Top flat from CL (in) Bottom flat from CL (in) Left flat from CL (in) Right flat from CL (in) Overall length (in) Overall width (in) Orientation Corner radius (in) Guide ring width (in) Sealing element width (in) Inner ring width (in)

Outline dimensions are for the outside of the sealing element. Flats are measured from the gasket centerline; leave a flat blank for none.

Pass bars Bar construction Bar width (in) Junction fillet radius (in) Bar thickness (in)

Bar locations are measured from the gasket centerlines to the bar centerline (or the bar end). Leave a field blank for the typical location shown; enter a negative value to place a bar on the opposite side. Each field’s letter matches the lettered dimension on the drawing.

Thickness and tolerances Sealing element thickness (in) Facing thickness (in) Jacket thickness (in) Ring thickness (in) Outline tolerance ± (in) Bar location tol. ± (in) Bar width tol. ± (in) Thickness tol. ± (in)

Materials Winding metal Custom winding metal Filler Custom filler Core metal Custom core metal Facing Custom facing Jacket metal Custom jacket metal Filler Custom filler Inner ring Custom inner ring metal Guide ring Custom guide ring metal Pass bar metal Custom pass bar metal Pass bar facing Custom pass bar facing or filler Manufacturer ID

Marking and special requirements Size designation Custom marking Special requirements (one per line)

Origin and certification Country of origin requirement

Certificate of Conformance (CoC) required Mill Test Reports (MTRs) required

Title block Customer Customer part no. Equipment / tag no. Quantity Revision Drawn by Drawing no. Additional notes (one per line)

Sheet Sheet size

Show millimeters [mm]

Heat exchanger gaskets are custom parts. Drawings are generated from the dimensions you enter, using common industry pass partition shape codes and ASME B16.20 construction references for convenience. Verify every dimension against the exchanger channel, tubesheet and cover before manufacture or purchase. TEMA width checks are advisory.

(281) 581-0176

sales@patriotbolt.com

1974 S Houston Ave, Humble, TX 77396

Heat exchanger gasket drawings with pass partition bars